Anchor sling fall protection pdf. See detailed inspection procedures.

Anchor sling fall protection pdf 12) IMPACT FORCES: Any anchor sling that has been subjected to the forces of arresting a fall must be immediately removed from service and marked as Ÿ All the synthetic material of fall protection equipment must be protected from slag, hot sparks, open flames or other heat sources. The capacity of the anchorage point is an area that if often overlooked in fall protection and one of the first things OSHA reviews during inspections/investigations. This personal protective equip-ment is designed and used as part of a fall protection system to pro-tect users against falls from heights in working areas and is meant to be used with other certificated com-ponents. Pregnant women or minors must not use it. It is important to allow adequate fall clearance below the work surface. The anchorage sling shall only be used within a fall arrest/prevention system according to EN 363 in combination with connector conforming to EN 362, a guided-type fall arrester on a flexible anchor line conforming to EN 353-2, a lanyard. Anchorages used for attachment of personal fall arrest equipment shall be independent of any Any anchor sling which shows signs of excessive wear, deterioration or aging, must be removed from use and marked “UNUSABLE” until destroyed. Age and fitness seriously affect a worker’s ability to withstand falls. The Anchor Sling is an anchorage connector designed to function as an interface between the anchorage and a fall protection, work positioning, rope access, or rescue system for the purpose of coupling the system to the anchorage. Ÿ It is recommended that heat resistant materials are used in such applications. Certified fall protection and product training is highly recommended before using this equipment and may be required by local Occupational Health and Safety Regulations. See detailed inspection procedures. jit tjena hhguo qiqiyo lwso hhnpw ckzs ksdcv nqf kqirx